Contents
  1. Overview
  2. Flight characteristics
  3. Recommended uses
  4. Plastics & variants
  5. History
  6. Notable throwers
  7. Similar discs

The Prodigy D3 is a 12-speed stable distance driver. With published flight numbers of 12 / 5 / -1 / 3, it is most often described as suited for flip-up-and-glide distance drives, max-distance backhands for moderate arm speeds.

Overview

The Prodigy D3 is a very fast, moderately stable distance driver officially rated 12/5/-1/3, with a 21.0 cm diameter and 2.3 cm rim.[1][2] Prodigy pitches it as a driver for all players that flies extremely far, and what separates the D3 is its ability to flip up and then glide without extreme drift to the right or a hard finish back to the left.[1] Some third-party flight charts list slightly different numbers for the mold, but 12/5/-1/3 is Prodigy's current official rating.[1][4]

Flight characteristics

Flight numbers: manufacturer vs. community
SourceSpeedGlide TurnFade
Prodigy (mfg) 12 5 -1 3 Published spec
Discpedia community Loading ratings…

Flight numbers describe the published behavior of the disc when thrown at its design speed. Real-world flight varies with plastic, weight, age, and thrower power. The community-averaged numbers above reflect crowd-sourced observations from real throws — typically slightly more understable than the manufacturer's published values, which is the most consistent pattern across nearly every commercial mold.

The D3 is the workable-distance slot in Prodigy's D line: throw it flat or on slight hyzer and let it flip to flat and glide before a moderate fade.[1] It suits intermediate and advanced players hunting distance without the extremes — less effort than a fully overstable bomber, more resistance to burning over than a true flippy driver.[1][3] Prodigy currently produces it in 200, 400, 400G, 500, and lightweight AIR plastics, including Spectrum and Ultra Soft variants.[1]

Best for:

  • Flip-up-and-glide distance drives
  • Max-distance backhands for moderate arm speeds
  • Turnover-resistant hyzer-flip lines
  • Long anhyzer flex shots that finish gently

Plastics & variants

The D3 is available in the following plastic blends from Prodigy:[1]

200, 400, 400G, 500, AIR

Plastic blend significantly affects flight character. Premium plastics like Champion, Z, or C-Line generally fly more overstable when fresh and hold their stability over time. Base plastics like DX, Pro, or Active beat in faster and become more understable workhorses with use.

History

The D3 was PDGA-approved on January 1, 2013 (certification 13-03), in the same first certification wave as the D1 and D2 that launched Prodigy+Disc">Prodigy Disc's original distance-driver line.[2] Prodigy debuted in 2013 with its numbered-mold system, and the D3 filled the straighter, more workable slot beneath the overstable D1 and D2.[2][3] The mold has stayed in continuous production and has been featured in signature runs, most notably Luke Humphries Signature Series editions in 2022 and again in the 2026 500 Spectrum run.[1]

Notable throwers

Luke Humphries

Similar discs

References & further reading

Sources

Content on this page has been cross-checked against the following sources. Numbered citations in the prose above link to the matching entry here.

  1. D3 Distance Driver — Prodigy Disc (official collection: flight 12/5/-1/3, specs, plastics, Humphries signature runs)
  2. D3 from Prodigy Disc — PDGA Equipment Certification (approved 2013-01-01, cert 13-03, dimensions)
  3. Prodigy Puts 'D' in Your Game — PDGA announcement (2013 D-line launch)
  4. Prodigy D3 — 1010 Discs (stable distance driver cross-reference)
  5. Prodigy D3 Flight Chart — Disc Golf Puttheads

This is a community page. Spotted something wrong or out of date? Suggest a correction — every edit is reviewed before it goes live.